Banks Power

Banks Cable - In Cab Y-Adapter - Starter - BanksBus III for iDash 1.8 DataMonster & Super Gauge - 61301-22

Banks Cable - In Cab Y-Adapter - Starter - BanksBus III for iDash 1.8 DataMonster & Super Gauge

Banks Cable, 3 Pin Delphi Extension, 36in - 61301-28

Extend the reach of Analog channels on the 4- or 5-Channel Analog Module harness.

Banks Cable, 3 Pin Delphi Extension, 72in - 61301-29

Extension Cable, sensor, 3-pin Analog Delphi extension, 72" for iDash 1.8 DataMonster and Super Gauge

Banks Cable, Starter - BanksBus-II & III, 6-Pin - 61301-20

Banks Bus cable connects iDash 1.8 located inside the cab to Banks Modules located under the hood. Cable go through firewall. (6 pin female - 6 pin female circular twist lock)

Banks In-Cab B-Bus Extension Cable - 48in - 61301-25

Banks Bus in-cab extension cable 4 feet (48 in) long. Used to install gauges further apart. Example, install one gauge in A-pillar and one gauge in center console using the B-bus extension cable to...

Banks Power 0-15 PSI Boost Gauge Kit - 64050

Superior Precision and Durability. Easy-to-Read DynaFact Gauge monitors turbocharger performance in diesels. Dynamically indicates boost output and allows driver to target ideal boost setting with...

Banks Power 01-04 Chevy 6.6L Computerized Brake Controller - 55154

Banks Power 01-04 Chevy 6.6L Computerized Brake Controller

Banks Power 2008+ Universal CAN Bus iDash 1.8 Super Gauge - For Use w/ PedalMonster - 66569

Banks iDash is the smallest, most powerful plug-n-play OBD-II monitor and control interface on the market. With its easy-to-read 2- to 8-gauge user-selectable LCD display, the iDash reads a multitude...

Banks Power 3 Pin 150PSIG 1/8NPT Thread Pressure Sensor - 63085-150G

Stainless steel pressure transducer with 1/8 NPT threads. 150 PSIG range. High accuracy and fast responding sensor. Plug and Play with Banks 4-CH Analog Module. Works with pre-defined configurations...

Banks Power 52mm Single Gauge Pod Kit w/ Sticky Base - 63341

Universal suction cup gauge mount designed to work with the iDash and other 52mm or 2-1/16 inch gauges. The adjustable arm allows for a wide range of mounting angles making this product universal for...

Banks Power 97-03 Ford 6.8L Mh A - L (EGR) PowerPack System W/AutoMind - 49479

Banks engineers dramatically improved the V-10's airflow and optimized engine efficiency. Best gains: +53 hp and +69 lb-ft, and 7% more MPG. Although the 6.8L V-10 Triton has two more cylinders than...

Banks Power AirMouse Ambient Air Density Sensor Module for iDash 1.8 Super Gauge - 66420

The new AirMouse Ambient Air Density sensor module measures the power potential of air entering all naturally aspirated, turbo, and supercharged engines. The mouse shaped sensor is a rugged...

Banks Power B-Bus In-Cab 6 Pin Extension Cable iDash/Derringer - Universal fit 4ft - 61301-31

Banks Power B-Bus In-Cab 6 Pin Extension Cable iDash/Derringer - Universal fit 4ft

Banks Power BanksBus-II Peripheral Underhood Extension Cable for iDash 1.8 DataMonster - 6ft - 61300-25

Banks Bus under hood extension cable 6 feet (72 in) long. Used to install Banks Modules further apart. Example, install one Derringer Module on left side of engine bay and install a sensor module on...

Banks Power Black Mounting Panel w/ Fasteners - One Gauge - 63001

Traditional under-dash position. Matte Black mounting panel available in 1-, 2-, 3- or 4-gauge configurations. Gauges sold separately, or included with some Banks power systems.

Banks Power Black Mounting Panel w/ Fasteners - Two Gauge - 63002

Traditional under-dash position. Matte Black mounting panel available in 1-, 2-, 3- or 4-gauge configurations. Gauges sold separately, or included with some Banks power systems.

Banks Power Cable Adapter OND-II to BanksBus III for PedalMonster - 61301-32

Banks Power Cable Adapter OND-II to BanksBus III for PedalMonster

Banks Power Dual Gauge Pod Suction Mount For iDash 1.8 And 52mm Gauges - 63344

Universal suction cup gauge mount designed to work with the iDash and other 52mm or 2-1/16 inch gauges. The adjustable arm allows for a wide range of mounting angles making this product universal for...

Banks Power Frequency Input Pigtail - 4-Pin Male for iDash 1.8 DataMonster & Super Gauge - 61301-18

Frequency input pigtail harness for 5-Ch Analog Module with frequency harness. 6 feet long. Used to wire your custom frequency sensor into Banks 5-ch analog with frequency module. Contains 12V, 5V,...

Banks Power GM 8.1L Mh-P - 208in WB Extension Pipe Kit - 53682

Before Banks engineers design; build and test power systems; they first examine stock vehicles to see where components choke airflow; create backpressure; raise EGTs; and compromise fuel delivery;...

Banks Power Hall Effect Speed Sensor For 5-ch Analog w/ Frequency Module - 66567

Banks Power Hall Effect Speed Sensor For 5-ch Analog w/ Frequency Module

Banks Power iDash 1.8 DataMonster / Super Gauge - 3 Pin 100PSIA 1/8NPT Thread Pressure Sensor - 63085-100A

Stainless steel pressure transducer with 1/8 NPT threads. 100 PSIA range. High accuracy and fast responding sensor. Plug and Play with Banks 4-CH Analog Module. Works with pre-defined configurations...

Banks Power iDash 1.8 DataMonster / Super Gauge - 3 Pin 100PSIG 1/8NPT Thread Pressure Sensor - 63085-100G

Stainless steel pressure transducer with 1/8 NPT threads. 100 PSIG range. High accuracy and fast responding sensor. Plug and Play with Banks 4-CH Analog Module. Works with pre-defined configurations...

Banks Power iDash 1.8 DataMonster / Super Gauge - 3 Pin 150PSIA 1/8NPT Thread Pressure Sensor - 63085-150A

Stainless steel pressure transducer with 1/8 NPT threads. 100 PSIG range. High accuracy and fast responding sensor. Plug and Play with Banks 4-CH Analog Module. Works with pre-defined configurations...