BUY NOW, PAY LATER. Starting at 0% APR 
Mishimoto Thermostatic Oil Cooler Kit – Silver – Honda S2000 (2000–2009)
Track-Tested Cooling for the AP1 & AP2 S2000 with Thermostatic Control
Whether you're slamming gears through mountain switchbacks or launching at the drag strip, your Honda S2000’s high-revving F20C/F22C engine demands serious oil temperature management. Enter the Mishimoto Thermostatic Oil Cooler Kit — engineered specifically for the 2000–2009 S2000 for maximum performance and longevity.
This silver-finish, 19-row oil cooler mounts cleanly behind the front grille for optimal airflow, using vehicle-specific brackets and pre-assembled stainless braided lines. The thermostatic sandwich plate ensures precise oil temperature regulation — giving you both cooling efficiency and safe cold-start warm-up.
Whether you daily drive, autocross, or road race your AP1 or AP2, this oil cooler kit increases your engine’s oil capacity by 0.6 quarts and helps prevent overheating, oil breakdown, and premature wear. As always, it’s backed by Mishimoto’s lifetime warranty.
Why Upgrade to the Mishimoto Oil Cooler Kit?
- ✅ 19-row silver oil cooler – mounted in direct airflow zone
- ✅ Includes thermostatic sandwich plate for optimal oil temp control
- ✅ Direct-fit design for 2000–2009 Honda S2000 (AP1 & AP2)
- ✅ Preassembled stainless steel braided lines – leak-free reliability
- ✅ Increases oil capacity by 0.6 qt – improves thermal stability
- ✅ Low-pressure drop design – maintains healthy oil pressure
- ✅ Includes S2000-specific brackets for clean installation
- ✅ Backed by the Mishimoto Lifetime Warranty
Vehicle Compatibility
- 2000–2009 Honda S2000 (Base)
- 2008–2009 Honda S2000 CR
Ideal For:
- ✔️ Track-day enthusiasts
- ✔️ Turbocharged or supercharged S2000 builds
- ✔️ Canyon runners & spirited weekend drivers
- ✔️ Tuners who need consistent oil cooling under load
- ✔️ AP1 & AP2 owners in hot climates
Technical Specifications:
- Cooler Size: 19-row
- Finish: Silver anodized
- Oil Capacity Increase: 0.6 qt
- Includes: Thermostatic sandwich plate (activation ~185°F)
- Hoses: Preassembled stainless steel braided lines
- Install Type: Direct bolt-on with vehicle-specific brackets
Installation Tips:
- Mount the oil cooler behind front grill using included brackets
- Attach thermostatic sandwich plate between oil filter and housing
- Route stainless lines securely away from moving parts
- Check for leaks after first heat cycle, then re-torque if needed
Frequently Asked Questions
Does this kit require cutting or modification?
No. It is a direct-fit kit using factory mounting points on all 2000–2009 Honda S2000 models.
Will this work with forced induction?
Yes. This kit is ideal for turbocharged or supercharged S2000 engines.
What temperature does the thermostatic plate open at?
Approximately 185°F – optimal for street and track oil management.
Protect your engine. Lower your temps. Extend your performance life. Upgrade your Honda S2000 with the Mishimoto thermostatic oil cooler kit — silver edition.
Read More
Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.
Returns Policy
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
Shipping
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
Yes it is.
Please make sure that you follow below steps:
1/ Download the package from themeforest.net (the file is in zip format)
2/ Extract the file you've just downloaded.
3/ Find this file: ella-3.0.0-sections-ready.zip in the folder Ella Sections Ready 3.0.0, then you just need to upload ella-3.0.0-sections-ready.zip file to your Shopify store.
To save your time and reach our support quickly, please follow below steps:
1/ Create a staff account for us (with Themes permission and Settings permission) http://docs.shopify.com/manual/settings/account/staff-members
2/ Capture screenshot or video for the issue you get.
3/ Specify which template and version you are using.
4/ Describe clearly how to reproduce the issue.
5/ Send all information (staff account, screenshot, video, template name and version, description of the issues, link) to email@domain.com
Yes, we will assist you to install the template if needed
Yes, we do. Please send your customisation requests to email@domain.com, we will give you our quote. Thank you.
Yes. You can turn on/off the animation in the Setting page.
Yes. You can turn on/off almost any blocks on the page (featured products, slideshow, banners, related products, recent products,...).
Yes, we have a setting for you to switch between these two options: Display on Hover and Display on Click.
The theme package includes theme source, Photoshop design files, sample data and manual guide.
That is not a problem. You just need to modify the width/height ratio in theme settings.
