BUY NOW, PAY LATER. Starting at 0% APR 
The 2015-2020 BMW F8X M3 and M4 rely on auxiliary radiators mounted low in the front corners of the car to keep the S55 in its operating window. Under sustained track use and aggressive street driving, the factory units run out of cooling capacity and heat-soak between runs - and their low position leaves them exposed to road debris and the plastic end tanks prone to cracking under repeated heat cycling. The Mishimoto Performance Auxiliary Radiator replaces the stock unit with a larger, fully reinforced aluminum core engineered to add thermal headroom and survive the conditions that retire the OEM part early.----The core carries 9% more volume and 32% more external tube area than stock, rejecting more heat into the airstream when the engine is working hardest. Strutted tubes reinforce the core against the vibration and impacts that fatigue a low-mounted radiator, while removable stone guard shields the exposed face from debris. Aluminum, TIG-welded end tanks replace the failure-prone factory components, and a robust bracket design fits both the driver and passenger-side locations from a single part.----Direct fit for the 2015-2020 BMW F8X M3 and M4 - installs in the factory auxiliary radiator location with no cutting, fabricating, or adapter work required. Backed by the Mishimoto Lifetime Warranty.
- Built for back-to-back track sessions - the upgraded auxiliary radiator adds the cooling capacity the S55 needs to hold temperatures through sustained high-load driving, where the factory unit heat-soaks and gives up margin.
- Strutted tubes resist vibration and impact - internal tube reinforcement strengthens the core against the road vibration and debris strikes that fatigue a low-mounted radiator over time.
- 32% more external tube area for greater heat rejection - paired with a 9% larger core volume, the expanded core moves more heat into the airstream than the stock auxiliary radiator.
- Mounts on either side of the car - a robust bracket design fits both the driver- and passenger-side auxiliary radiator locations, so a single part covers either position.
- Confirmed direct fit for the 2015-2020 BMW F8X M3 and M4 - installs in the factory auxiliary radiator location with no cutting, fabricating, or adapter work required.
- No plastic tanks to crack - aluminum, TIG-welded end tanks replace the factory components that fail under repeated heat cycling and high-output use.
- Removable stone guard shields the core - protects the exposed face from road debris thrown up at the front of the car.
- Own it for life - backed by Mishimoto’s Lifetime Warranty, your investment is protected long after install day.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | BMW | M2 | Competition |
| 2020 | BMW | M2 | CS |
| 2015-2018 | BMW | M3 | Base |
| 2015-2020 | BMW | M4 | Base |
| 2019-2020 | BMW | M4 | CS |
| 2016 | BMW | M4 | GTS |
Read More
Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.
Returns Policy
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
Shipping
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
Yes it is.
Please make sure that you follow below steps:
1/ Download the package from themeforest.net (the file is in zip format)
2/ Extract the file you've just downloaded.
3/ Find this file: ella-3.0.0-sections-ready.zip in the folder Ella Sections Ready 3.0.0, then you just need to upload ella-3.0.0-sections-ready.zip file to your Shopify store.
To save your time and reach our support quickly, please follow below steps:
1/ Create a staff account for us (with Themes permission and Settings permission) http://docs.shopify.com/manual/settings/account/staff-members
2/ Capture screenshot or video for the issue you get.
3/ Specify which template and version you are using.
4/ Describe clearly how to reproduce the issue.
5/ Send all information (staff account, screenshot, video, template name and version, description of the issues, link) to email@domain.com
Yes, we will assist you to install the template if needed
Yes, we do. Please send your customisation requests to email@domain.com, we will give you our quote. Thank you.
Yes. You can turn on/off the animation in the Setting page.
Yes. You can turn on/off almost any blocks on the page (featured products, slideshow, banners, related products, recent products,...).
Yes, we have a setting for you to switch between these two options: Display on Hover and Display on Click.
The theme package includes theme source, Photoshop design files, sample data and manual guide.
That is not a problem. You just need to modify the width/height ratio in theme settings.
