Sold out
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

BMR 67-69 1st Gen F-Body Front Hollow 1.25in Sway Bar Kit w/ Bushings - Black Hammertone

2 sold in last 8 hours
BMRSB004H
Out of stock
Sway Bars
$269.95
The two primary functions of sway bars are to control body roll and to determine the...
Size Guide

customers are viewing this product
BMR 67-69 1st Gen F-Body Front Hollow 1.25in Sway Bar Kit w/ Bushings - Black Hammertone
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB004 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 1.25-inch DOM tubing, the SB004 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB004 attaches to your Nova with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR Suspension designed the SB004 sway bar for street performance, autocross, and road race applications. The SB004 gives you a 200% increase in rate over the stock bar. These rate increases allow you to drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB004 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

This Part Fits:

Year Make Model Submodel
1967-1969 Chevrolet Camaro Base
1967-1969 Chevrolet Camaro RS
1967-1969 Chevrolet Camaro SS
1967-1969 Chevrolet Camaro Z28
1968 Chevrolet Chevy II Nova
1969-1974 Chevrolet Nova Base
1973-1974 Chevrolet Nova Custom
1968-1969 Pontiac Firebird 350
1969 Pontiac Firebird 350 HO
1967-1969 Pontiac Firebird 400
1967-1969 Pontiac Firebird Base
1967 Pontiac Firebird HO
1967-1969 Pontiac Firebird Sprint
1969 Pontiac Firebird Trans Am
Read More
Read Less

Customer Reviews

Your cart

×