Mishimoto 2021+ BMW G80 M3 Skid Plate - Engine - Titanium

The 2021+ BMW G8X M2, M3, and M4 run an oil cooler mounted low at the front of the car, directly in the path of the rocks, debris, and hard contact that come with spirited street driving and track use. The factory setup leaves that cooler exposed. The Mishimoto Titanium Skid Plate shields it with a plate built from titanium - a material with 78% higher tensile strength than aluminum - so it absorbs strikes and ground contact with far less deformation than a conventional aluminum plate.----Protection here doesn’t come at the cost of cooling. A retained air diffuser preserves the pressure differential that drives air through the oil cooler core, and vented crosscuts keep air flowing while blocking the debris that would otherwise reach the cooler. The diffuser bolts to the plate, so it can be replaced if it’s damaged or left off entirely on lowered cars that need extra ground clearance. Recessed mounting hardware sits flush in a smooth face, so obstacles slide across the plate rather than catching bolt heads and shearing them off. Where the factory plastic skid plate cracks and warps under impact and heat, titanium shrugs off the same abuse and resists the corrosion of wet, salted, and off-pavement miles.----One plate fits both the stock oil cooler and the Mishimoto oil cooler, so an upgraded cooler doesn’t call for a different skid plate. Confirmed direct fit for the 2021+ BMW G8X M2, M3, and M4 - installs in under an hour with no drilling or cutting required. Backed by the Mishimoto Lifetime Warranty.

• Titanium is 78% stronger than aluminum - the higher tensile strength lets the plate take debris strikes and hard ground contact with far less deformation than an aluminum skid plate.
• Protects without choking the oil cooler - a retained air diffuser and vented crosscuts keep air moving through the cooler core while blocking the rocks and road debris that reach it.
• Won’t crack like the factory plastic - titanium shrugs off the impacts, heat, and corrosion that split and warp the OEM plastic skid plate over wet, salted, and off-pavement miles.
• Recessed hardware won’t snag or shear - the mounting bolts sit flush in a smooth face, so obstacles slide across the plate instead of catching and tearing the mounts loose.
• Removable air diffuser adapts to your build - it bolts to the plate, so you can swap it if damaged or leave it off entirely on lowered cars that need extra ground clearance.
• Fits stock and Mishimoto oil coolers - one plate covers either setup, so upgrading to a Mishimoto oil cooler doesn’t require a different skid plate.
• Confirmed direct fit for the 2021+ BMW G8X M2, M3, and M4 - installs in under an hour with no drilling or cutting required.
• Own it for life - backed by Mishimoto’s Lifetime Warranty, your investment is protected long after install day.

This Part Fits: