BUY NOW, PAY LATER. Starting at 0% APR 
The Ford Raptor is the undisputed king of factory off-road performance. It is built to jump, crawl, and blast through the desert at speeds that would disintegrate a lesser truck. But even a beast like the Raptor is limited by its ability to breathe. Factory intake systems are designed for silence and cost-efficiency, not raw output. If you want to unlock the full potential of your twin-turbocharged EcoBoost engine, you need to upgrade.
At DTX Performance, we don't settle for "good enough." We demand excellence. When it comes to the Raptor, one name stands above the rest: aFe Power.
WHY YOUR RAPTOR NEEDS MORE AIR
Your engine is essentially a giant air pump. The more air you can force into the combustion chamber: and the cooler that air is: the more power you generate. The factory Ford airbox is restrictive. It uses thin paper filters and convoluted tubing that creates turbulence. This chokes the turbos, slows down spool time, and leaves horsepower on the table.
Upgrading to a high-performance cold air intake (CAI) delivers three immediate results:
- Increased Horsepower and Torque: More oxygen equals a bigger bang.
- Better Throttle Response: Eliminate the lag between your foot and the floor.
- Enhanced Turbo Sound: Let those turbos whistle and breathe the way they were meant to.
THE DOMINANCE OF AFE POWER
While brands like Rotofab and JLT dominate the street and track scenes for the Camaro and Hellcat platforms, aFe Power has spent decades perfecting the science of off-road airflow. For the Ford Raptor owner, aFe is the gold standard. Their systems are engineered to withstand the vibration, dust, and extreme heat of off-road environments while delivering dyno-proven gains.
THE MOMENTUM GT: THE OFF-ROAD WORKHORSE
The aFe Power Momentum GT is the go-to choice for the 2024 Ford Ranger Raptor and the F-150 Raptor. This isn't just a filter on a stick; it’s a fully sealed system engineered for maximum efficiency.
- Performance Gains: The Momentum GT delivers up to 17 horsepower and 18 lb-ft of torque.
- Airflow Superiority: It outflows the factory intake by 11%.
- Pro 5R Filtration: This system utilizes a 7" tall radial flow air filter with five layers of progressively finer cotton gauze. It is pre-oiled, washable, and reusable.
- Durability: Features a high-quality, one-piece sealed housing with a built-in sight window so you can check your filter without disassembly.
The Momentum GT is designed for the driver who spends as much time in the dirt as they do on the pavement. It uses factory mounting locations for a rock-solid fit that won't rattle loose when the terrain gets rough.
THE TRACK SERIES: MAXIMUM VELOCITY
For Raptor owners who want the absolute peak of performance and don't mind a more aggressive look and sound, the Track Series Carbon Fiber Intake is the weapon of choice.
- Extreme Power: Dyno-proven gains of +22 HP and +22 lb-ft of torque.
- Unrivaled Flow: It outflows the factory system by a staggering 92%.
- Premium Construction: Features a lightweight, high-gloss carbon fiber intake tube that minimizes weight and maximizes heat resistance.
- Open Design: The Track Series uses an open-element design to capture air directly from the top of the radiator support, pulling in a massive 865 CFM @ 7" H2O.
This system is about aggressive aesthetics and maximum volume. If you want to turn heads every time you mash the throttle, this is your intake.
COMPARING THE TITANS: ROTOFAB, JLT, AND AFE
In the performance world, brand loyalty is everything. At DTX Performance, we carry the best in the business. Here is how the landscape looks:
- Rotofab: The undisputed king of the modern Camaro. Their hand-crafted designs are the benchmark for GM enthusiasts. If you’re building a 1,000 HP ZL1, you go Rotofab.
- JLT: The powerhouse for Hemi and Shelby builds. Their oversized intake tubes are legendary for supporting massive boost on the street.
- aFe Power: The masters of the EcoBoost and off-road platforms. Their focus on sealed housing technology and multi-layer filtration makes them the only logical choice for the Raptor’s high-dust, high-heat operating conditions.
We choose aFe for the Raptor because they understand that off-roading requires more than just airflow: it requires protection. Their Pro 5R and Pro DRY S filters ensure that while your engine gets more air, it isn't getting more dirt.
TECHNICAL BREAKDOWN: WHAT MAKES AFE DIFFERENT?
1. ONE-PIECE HOUSINGS
Many competitors use multi-piece housings that rely on bolts and gaskets. These are failure points in high-vibration off-road scenarios. aFe’s Momentum series uses a roto-molded, one-piece housing that is virtually indestructible.
2. DYN-TUNED INTAKE TUBES
It’s not just about the size of the tube; it’s about the velocity of the air. aFe tunes the diameter and curvature of their intake tubes to maintain optimal air speed, ensuring that you don't lose low-end torque while chasing top-end horsepower.
3. PREMIUM HARDWARE
Every aFe kit at DTX Performance comes with high-quality stainless steel T-bolt clamps and heavy-duty silicone couplings. We don't do cheap plastic clips. We build for reliability.
THE DTX PERFORMANCE ADVANTAGE
When you buy from DTX Performance, you aren't just getting a box of parts. You’re getting a performance partnership. We specialize in modern muscle and high-output trucks. Whether you’re looking for the Best Exhaust for your RAM TRX or the ultimate intake for your Raptor, we have the expertise to guide your build.
SHOP WITH CONFIDENCE
- Expert Support: Our team knows these trucks inside and out.
- Precision Fitment: We only stock parts that fit perfectly and perform as advertised.
- Fast Shipping: Get your parts and get back on the road (or trail).
PAIRING YOUR INTAKE WITH AN EXHAUST
An intake is only half the battle. Once you let the air in, you need to let it out. For the ultimate Raptor build, we recommend pairing your aFe intake with a high-flow exhaust system. While aFe dominates the intake side, we carry a full range of AWE Tuning exhaust systems for various platforms, ensuring your vehicle sounds as good as it performs. Check out our Full Catalog for more high-performance inspiration.
INSTALLATION: NO SPECIAL TOOLS REQUIRED
One of the best things about the aFe Power systems for the Raptor is the ease of installation. These kits are designed as true "bolt-on" upgrades. With basic hand tools and about an hour of your time, you can transform the performance of your truck.
- Disconnect the factory sensors.
- Unbolt the restrictive factory airbox.
- Install the aFe housing and intake tube.
- Secure the Pro 5R filter and reattach sensors.
- Hit the dirt.
FINAL VERDICT: THE BEST INTAKE FOR YOUR RAPTOR
If you want the best for your Ford Raptor, the choice is clear. For a balance of off-road protection and significant power gains, the aFe Momentum GT is the winner. For those chasing maximum numbers and a premium carbon fiber finish, the Track Series is the ultimate upgrade.
Stop settling for factory restrictions. Give your Raptor the air it craves.
READY TO BUILD?
Select your vehicle and find the perfect aFe Power intake today. At DTX Performance, we promise to only send you the good stuff. No filler, no fluff: just pure performance.
Push the limits. Build your legacy. Shop DTX Performance.
